테스트 잘 돌아갔고...

본격적으로 돌려볼려고 다 붙였더니 오류가 ㅠㅠ

kvm: -device vfio-pci,host=0000:06:00.0,id=hostpci1,bus=ich9-pcie-port-2,addr=0x0: vfio 0000:06:00.0: failed to add PCI capability 0x11[0x50]@0xb0: table & pba overlap, or they don't fit in BARs, or don't align
TASK ERROR: start failed: QEMU exited with code 1

이 메시지에서 막히네요.

sata controller로 pci-e 패스쓰루가 잘되어서 당연히 nvme도 될줄 알았는데....

당연히는 없군요... ㅠㅠ

06:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03) (prog-if 02 [NVM Express])

        Subsystem: Silicon Motion, Inc. SM2263EN/SM2263XT (DRAM-less) NVMe SSD Controllers

        Flags: fast devsel, IRQ 17, IOMMU group 19

        Memory at 81100000 (64-bit, non-prefetchable) [size=16K]

        Capabilities: [40] Power Management version 3

        Capabilities: [50] MSI: Enable- Count=1/16 Maskable+ 64bit+

        Capabilities: [70] Express Endpoint, MSI 01

        Capabilities: [b0] MSI-X: Enable- Count=22 Masked-

        Capabilities: [100] Advanced Error Reporting

        Capabilities: [158] Secondary PCI Express

        Capabilities: [178] Latency Tolerance Reporting

        Capabilities: [180] L1 PM Substates

        Kernel driver in use: vfio-pci

        Kernel modules: nvme

nvme가 vfio로 제대로 로딩된거 같은데....

관련지식이 거의 없다보니 이래저래 해보는데 어렵네요 ㅠㅠ

구글에서 검색해서 1페이지에 나오는건 거의 다 해본듯 합니다 ㅠㅠ